LiteStep
Version 0.24.5
Documentation


Table Of Contents

Introduction Installing Uninstalling Basic Usage Step.rc Modules.ini
LSCPU LSTime Themes X-Mouse Tips Misc. Info About the Team


Detailed Index

Basic Usage Step.rc
Modules.ini LSTime Themes


Welcome to LiteStep

LiteStep is a shell replacement for Windows 9x/NT that is fast, functional, stable, and very customizable. The interface resembles the famous NeXTStep operating system and also Window Maker, a X Window Manager. LiteStep consists of an executable (litestep.exe) and several modules, grouped into two basic types: core modules, which handle all the functions of LiteStep; and app modules, which are usually miniature applications that run as part of the wharf. Some examples of core modules would be wharf.dll, popup.dll, and desktop.dll, each responsible for handling their respective functions. Some application modules are lstime.dll, lsvwm.dll, lscpu.dll etc.



Installing

Installing LiteStep is very easy. But before you proceed, make sure you have the following:

  • An existing installation of either Windows 95, Windows 98, or Windows NT version 4.0 and later.
  • It may be a good idea to have a reliable boot disk handy, just incase something really goes wrong!
  • Once you are ready, just simply Unzip the installation files to a temporary director, such as C:\LSInstall. Then all you have to do is run the installation program (install.exe). During the installation process, you will be asked to select a default theme. You will also be asked whether the installer should make the apropriate changes for you so that LiteStep will be the default shell each time you start your computer.

    Once you have LiteStep installed, make sure you edit your step.rc!!! Do not expect your LiteStep to work without editing the step.rc first!

    NT Users: during the installation process, it will ask you whether the install should make the apropriate changes for you so that LiteStep will be the default shell. However, there will be two ways this can be made possible. You will be asked whether to make LiteStep as a default shell for all the users (All Users) on your computer/server or to just make it as only your own default shell (Current User). If you choose to install as a default shell for all users, you may get stuck with a unbootable system if the LiteStep shell won't start.

    Note: if you are upgrading from an earlier version of LiteStep, please make sure it is not running while you install this release of it! If you are running NT, in most cases it will let you install over your previous version of LiteStep without requiring you not to have LiteStep running.


    Removing LiteStep

    There is really no reason why you should uninstall LiteStep (because it rocks!), but here is how you do it anyway:

    If you are using:

       Windows 95/98
       Windows NT

    Important Note

    Just in case something goes wrong, you should have a reliable boot disk on hand. This is a very easy way to fix any LiteStep related problems you might have with LiteStep loading as your shell (if you are using Windows 95/98). Simply use the boot disk to boot to DOS, cd C:\windows and edit your system.ini there. If you don't know how to do any of this, then you might wish to reconsider using LiteStep. It is up to you, the user, to anticipate and intercept any problems you might have.


    Windows 95/98

    Method 1:
    1. Open C:\Windows\System.ini with NotePad or any other text editor
    2. You should see the following lines of text at the beginning of the file: file:
        [boot]
        (a bunch of stuff you shouldn't care about)
        shell=C:\LiteStep\LiteStep.exe
    3. Change the line shell=C:\LiteStep\LiteStep.exe to shell=Explorer.exe
    Method 2:
    Use the ShellSW utility included with LiteStep

    Windows NT

    If you installed LiteStep that affected:
       Current User Only
       All Users


    Current User Only
    1. Load the Registry Editor (RegEdit)
    2. Go to the following key: HKCU\Software\Microsoft\Windows NT\
        CurrentVersion\Winlogon
    3. Remove the following value: Name: Shell
    4. Log out, and Log back in

    All Users
    Note: You will need Administrator access privileges.
    1. Load the Registry Editor (RegEdit)
    2. Go to the following key: HKLM\Software\Microsoft\Windows NT\
        CurrentVersion\WinLogon
    3. Change the following value:
        Name: Shell, Original Value: C:\LiteStep\LiteStep.exe, New Value: Explorer.exe
    4. Reboot the system for changes to take effect


    Basic usage

    LSVWM Task Manager LSTime Standard Windows Conventions
    Using The Popup Wharf Transparency Loading Themes

    LSVWM - Virtual Desktop Manager

    The LSVWM (LiteStep Virtual Window Manager) manages your desktop and windows, allowing you to move and organize your open windows. The LSVWM is represented by an icon in the Wharf, consisting of four evenly divided squares. The highlighted/colored area represents the active virtual desktop you are in. Little rectangles or squares are shown within the whole VWM icon itself; these boxes represent the windows that exist in the desktops.

    LSVWM Sample GraphicAs you can see in the sample graphic, there are little white boxes, those are the windows that exist on your desktops.


    Usage of LSVWM is as follows:

    Left Click (on the window representations) & Drag   Drags windows between or within desktops
    Right Click   Switches to the desktop you clicked on
    The LSVWM is also accessable through key combinations to switch desktops. Those key combinations are already preconfigured for you in the Step.rc file for your convenience.

    This is how you use the LSVWM via key combinations, using the default configuration:

    Win + Right Arrow
    Win + Left Arrow
    Win + Up Arrow
    Win + Down Arrow

    Win is the Windows key

    Changing desktops is also possible with the mouse, which is also configurable by its resistance, that is the delay between positioning your cursor at the edge of the screen and switching desktops. More about configuring resistance and the LSVWM key combinations are in the "Editing your Step.rc" section.


    Task Manager

    The Task Manager allows you to manage your active tasks. It allows you to switch and kill tasks. You really have no use for it unless you have the Task Bar disabled. The Task Manager looks like any other Wharf Folder icon in your Wharf, except clicking on it will give you a list of active tasks. The tasks in the Task Manager are labeled for easy identification.

    Usage of the Task Manager is as follows:

    Left Click   Switches to the selected task
    Right Click   Opens the System Menu
    Shift-Right Click   Sets the selected icon to a Window Class (useful to set a 64x64 icon)


    LSTime

    LSTime Analog Clock Sample 1 LSTime Analog Clock Sample 2 LSTime Digital Clock Sample
    LSTime is a clock that sits in your Wharf. It will also display the current date.

    To adjust your time and date:

    Left-Double Click   Opens the standard Windows Time & Date Properties
    You may also customize LSTime if you wish.

    Standard Windows Conventions

    These are some Windows funtions you might find useful:

    Alt-Tab Switches between tasks, hold down Alt for a menu of active tasks
    Alt-Shift-Tab Same as Alt-Tab, except it goes in reverse.
    Alt-Space Brings up the System Menu
    Alt-- (that's minus) Brings up the Group Menu (that is, if you have a window within a window, you bring up the menu of the sub window)
    Alt-Esc Switches to the last task you were using
    Alt-F4 Closes the active task
    Ctrl-F4 Closes the active Group window
    F10 Same function as Alt, brings up the menu (Usually File)
    Ctrl-Shift-Esc Loads NT's built-in Task Manager (WinNT only.)

    Popup Menu

    The Popup Menu is a user-defined list, allowing easy access to programs, files, or commands you might not use often enough to place in the wharf.

    Usage is as follows:

    Right-Click Brings up the Popup Menu (click on the Wharf or Desktop), if it already exists it will scroll down the menus if the listings go off the screen.
    Up/Down Arrow Navigates through the menus and highlights a listing
    Left Arrow Closes the current SubMenu
    Right Arrow Opens the highlighted SubMenu
    Enter Runs the highlighted task, or if it is a SubMenu it opens it.
    Page Up/Page Down Navigates through the menus quickly

    Wharf

    The Wharf is a string of tiles and modules on your screen which allows you quick access to your frequently used software.

    To move the Wharf, drag the Wharf to its desired location by its Titlebar. This will not work if NoWharfTilebar is enabled.

    To put the Wharf into window shade mode (minimized), double click on its Titlebar, or activate it by running the !ToggleWharf command from the Wharf, Shortcut, Hotkey, or Popup.

    Transparency

    LiteStep supports Transparency in the Wharf, Shortcut, Taskbar, and Popup graphic (.bmp) files.

    The Transparency color is FF00FF, or 255 Blue, 0 Green, 255 Red.



    Editing your step.rc

    The step.rc file is the LiteStep configuration file. Everything changed in that file affects how LiteStep looks and acts. Therefore, you must edit the file the first time you install LiteStep or when upgrading to a new version. You can edit it with any text editor, such as Notepad, Edit, TextPad, etc. We have discovered that most people decide skip reading this section and then expect their LiteStep is expected to work. We have also discovered that people tend to skip the mumbo jumbo part. And since you've just gotten to the mumbo jumbo part, we'll suggest you do the following to make your life easier (and yes, you have to at least skim over this section):

    Open the step.rc file now, and keep both that file and this manual open. We're not asking you to read this section word for word, rather we want you to consider this section reference material. Go ahead and go through your step.rc file now, and where you get to something you don't know, switch back to this window and find out what it is! Does that sound more enjoyable? We hope so.

    Afraid to touch the step.rc? For you configure-phobic people, there may be a solution for you: LSCP, or LiteStep Configuration Panel. LSCP will not be supported by the us. Until you are comfortable editing your step.rc, make sure you back up your step.rc before editing. Since LSCP is beta software, unpredictable results may occur, and may break your step.rc in the process. To get LSCP and for more information about it, go to: http://litestep.ru.ac.za/lscp.html.

    Commands Index

    Commands
     

    Wharf

    *Wharf titlename tile [%systemname] action [parameters]

    Sets a tile in the Wharf, either a folder or application tile.

    titlename the title name of the tile as it would appear in the Tile Hints
    tile the tile (icon) to use for the Wharf tile.
    The tile can be in onr of 3 formats:
    Bitmap (.bmp) - tile.bmp
    Icon within a DLL library (.dll) - ".extract=file.dll,n"
    Icon within a Executable file (.exe) - ".extract=file.exe,n"
       ,n is the icon number, starting from 0. If no ,n is used, it assumes it to be icon 0.

    If a * is placed as the first letter before tile, then anything specified in DefaultBackPix or FolderPix will not be used for this tile and will be substituted with transparency.

    %systemname this is optional. This defines the tile with a Wharf SystemName. Some modules such as LSAmp use it for example.
    action this tells the tile what to perform.
    Can be one of:
    Program Path (ie: C:\Windows\notepad.exe)
    Folder, which tells the tile to act as a folder and begin a folder subsection (anything after this will be inside the folder until ended by a ~Folder).
    ~Folder will end the folder subsection; anything after it will not be in the above folder.
    A static !action command built into LiteStep.
    PixmapPath path

    This tells LiteStep where to look for images. path is the directory in which to look for images. Default: images

    DefaultBackPix file.bmp

    This specifies what background bitmap you want for your Wharf tiles. File must be in Bitmap (.bmp) format and be 64x64 pixels. Default: default.bmp

    FolderPix file.bmp

    This tells LiteStep what image to use when displaying Wharf folders. File must be in Bitmap (.bmp) format and be 64x64 pixels. It is generally recommended that you leave this at its default state. Default: 3dots.bmp

    WharfTitleFontSize n

    Sets the font size of the Wharf tiles' titles. This is only used by the Task Manager unless you have WharfAllTitles enabled. n is the font size (in points). Default: disabled

    WharfTitleFont file

    Tells LiteStep what font to use in the Wharf tiles' titles. This is only used by the Task Manager unless you have WharfAllTitles enabled. file is the font's filename (.fon, .ttf). Default: disabled

    WharfTitleFore BBGGRR

    Sets the Wharf tiles' title foreground color. BBGGRR is the RGB color code to be used. hexadecimal numbers such as: FFFFFF (white), 000000 (black), 808080 (gray). Default: FFFFFF

    WharfTitleBack BBGGRR

    Sets the Wharf tiles' title background color. BBGGRR is the RGB color code to be used. hexadecimal numbers such as: FFFFFF (white), 000000 (black), 808080 (gray). Default: 802020

    WharfAllTitles

    Forces LiteStep to put titles on all the Wharf tiles. Default: disabled

    NTStyleTaskMgr

    Forces the Task Manager to behave like NT's Explorer shell; when a window is the active window, clicking on its icon will minimize it. When this is not enabled, Task Manager will simply switch back to the active window when the icon is clicked on (as if nothing happened). This is generally not recommended since it may be quite confusing (to novices). Default: disabled

    WharfBevelWidth n

    Sets the width of the Wharf bevel (edge thickness of the tiles.) n is the width in pixels. Use 0 if you don't want any bevel. Default: 1

    WharfPressOffset n

    Sets the offset number to shift from the original image location for a button press effect. n is the offset number in pixels. Default: 1

    WharfNoHints

    Forces LiteStep not to display any hints (ToolTips) with the Wharf tile names when the mouse cursor is over a tile. Default: disabled

    WharfNoAnim

    Forces LiteStep not to animate the opening of Wharf folders. Default: disabled

    Icon file.bmp [.] regexp

    Defines an icon for a specified window. The . is optional, and sets the icon's regexp as a class name instead of a window name. regexp is the regular expression to define a window name or a class name. Wildcards are allowed, ie: *Netscape will match any window with a title ending in "Netscape" in the title.

    AutoHideWharf

    Makes the Wharf autohide when not in use. Default: disabled

    AutoHideDelay

    Sets the time delay between inactivity and autohiding of Wharf and/or TaskBar. Useless if you do not have AutoHideWharf or AutoHideTaskbar enabled. Default: disabled, value 500

    WharfNoTitlebar

    Forces the Wharf not to display a titlebar; the old style of displaying the Wharf. Default: disabled

    Note: with this enabled, you will be unable to move the Wharf to another location. You will also be unable to toggle the window shade mode with the mouse, instead you must use the !ToggleWharf command.

    WharfTitlebarPix file.bmp

    Sets the image into the Wharf's titlebar area. Useless if you have WharfNoTitlebar enabled. File must be in Bitmap (.bmp) format and be 64x16 pixels.

    WharfCapHeight size

    Sets the size of the Wharf Titlebar. Default: 16

    WharfAutoUnpress

    Makes an opened Wharf Folder to automaticly retract back into its closed state when you move the mouse off it. Default: disabled.

    WharfCloseOnSwitch

    Closes an opening Wharf Folder when the window focus changes. Wharf Folders closes immediately if WharfNoAnim is enabled. Default: disabled.

    WharfPressOffset pixels

    Defines the number of pixels for a depressed Wharf Tile to move to the right and down. Default: 2

    WharfAnimStep pixels

    Sets the number of pixels per draw during Wharf Folder opening. Useless if you have WharfNoAnim enabled. Default: 16

    WharfAnimDelay time

    Sets the delay between draws during Wharf Folder opening. Useless if you have WharfNoAnim enabled. Default: 10

    WharfOpenSound file.wav

    Sets a sound into all Wharf Folders; when it is opening, the defined sound will be played. File must be in Wave (.wav) format.

    WharfCloseSound file.wav

    Sets a sound into all Wharf Folders; when it is closing, the defined sound will be played. File must be in Wave (.wav) format.

    WharfMinSound file.wav

    Sets a sound into the Wharf Titlebar; when it is going into window shade mode (minimized), the defined sound will be played. File must be in Wave (.wav) format.

    WharfMaxSound file.wav

    Sets a sound into the Wharf Titlebar; when it is going out of window shade mode, the defined sound will be played. File must be in Wave (.wav) format.

    SystrayDockToWharf

    Makes all System Tray icons to go into a Wharf Tile.
    Note: you must load Wharf.dll before Desktop.dll is loaded!

    To define a Wharf Tile for all the System Tray icons, add the following line:

    *Wharf "Systray" tile.bmp %LSSystray !none

    More imformation maybe found by reading about the *Wharf command.

    WharfDblClickDockOnLeft

    Makes the Wharf dock to the left side of the screen when Double Clicked on the Wharf Titlebar. Default: disabled; docks to the right side of the screen.

    WharfDblClickXPosition

    When this is enabled, Double clicking on the left side of the Wharf Titlebar will put it into Window Shade mode and will also move the Window Shaded Wharf to the specified X (horizontal) position. Default: disabled.

    SnapToSensitivity n

    Sets the distance (in pixels) before the Wharf snaps to the edge of the screen. n is the distance number of pixels. Default: 16


    Popup

    *Popup entryname entryheight file.bmp action [parameters]

    Sets an entry or folder into the Popup menu.

    entryname the title name of the entry as it would appear in the Popup menu
    entryheight the height of the entry in pixels
    file.bmp Sets a texture into the specific entry of the Popup Menu. File must be in the Bitmap (.bmp) format and at an approximate size of 400x17. If you do not wish to use a specific file for this, you may use the one specified for PopupEntryPix by using default.bmp.
    action this tells the Popup entry what to perform.
    Can be one of:
    Program Path (ie: C:\Windows\notepad.exe)
    Folder, which tells the entry to act as a folder and begin a folder subsection (anything after this will be inside the folder until ended by a ~Folder).
    ~Folder will end the folder subsection; anything after it will not be in the above folder.
    A static !action command built into LiteStep such as !PopupFolder and !PopupDynamicFolder.
    PopupTitlePix file.bmp

    Sets the image to be used for the Popup Menu's titlebars. File must be in Bitmap (.bmp) format and at an approximate width of 400.

    PopupBottomPix file.bmp

    Sets the image to be used for the Popup Menu's bottom. File must be in Bitmap (.bmp) format and at an approximate width of 400.

    PopupEntryPix file.bmp

    Sets the image to be used for the Popup Menu's normal, unselected entries. File must be in Bitmap (.bmp) format and at an approximate width of 400.

    PopupSelEntryPix file.bmp

    Sets the image to be used for the Popup Menu's highlighted, selected entries. File must be in Bitmap (.bmp) format and at an approximate width of 400.

    PopupTitleColor BBGGRR

    Sets the font color for the Popup Menu's title entries. BBGGRR is the RGB color code to be used. hexadecimal numbers such as: FFFFFF (white), 000000 (black), 808080 (gray). Default: FFFFFF

    PopupEntryColor BBGGRR

    Sets the font color for the Popup Menu's unselected entries. BBGGRR is the RGB color code to be used. hexadecimal numbers such as: FFFFFF (white), 000000 (black), 808080 (gray). Default: 000000

    PopupSelEntryColor BBGGRR

    Sets the font color for the Popup Menu's selected entries. BBGGRR is the RGB color code to be used. hexadecimal numbers such as: FFFFFF (white), 000000 (black), 808080 (gray). Default: 000000

    PopupTitleBack BBGGRR

    Sets the background color for the Popup Menu's title entries. BBGGRR is the RGB color code to be used. hexadecimal numbers such as: FFFFFF (white), 000000 (black), 808080 (gray). Default: FFFFFF

    PopupNormalBack BBGGRR

    Sets the background color for the Popup Menu's unselected entries. BBGGRR is the RGB color code to be used. hexadecimal numbers such as: FFFFFF (white), 000000 (black), 808080 (gray). Default: FFFFFF

    PopupSelBack BBGGRR

    Sets the background color for the Popup Menu's selected entries. BBGGRR is the RGB color code to be used. hexadecimal numbers such as: FFFFFF (white), 000000 (black), 808080 (gray). Default: FFFFFF

    HotListName "name"

    Sets the name of the Popup Menu title. ie: HotListName "The List" Default: HotList

    MinPopupWidth n

    Sets the minimum Popup width. n is the width in pixels. Default: 100

    PopupFixedWidth n

    Sets a fixed width for the Popup menu. Default: disabled

    NoPopupBevel

    Disables the bevel in the Popup Menu entries. Default: disabled

    PopupFontFace fontname

    Specifies the font to use in the Popup Menu. ie: PopupFontFace "Times New Roman (Western)" Default: Comic Sans MS

    PopupFontHeight n

    Specifies the font size to be used in the Popup Menu. n is the pixel size number. ie: PopupFontHeight 10. Default: 14
    Warning: negative side effects may occur when using a font size that does not fit in the Popup Menu (>17 pixels).

    ShrinkPopupBar

    Shrinks the bitmap (.bmp) used in the Popup to fit the Popup Menu size. Default: disabled
    Note: All Bitmaps must be the same size when using this setting, otherwise the Popup Menu may not display correctly.

    NoPopupTransparent

    Disables Popup Menu transparency; may increase performance. Default: disabled.

    PopupTextOffset n

    Sets the number of pixels from the left of the Popup menu before displaying text and also cutting off any overflowing text from the number of pixels from the right. n is the number of pixels.

    NoPopupFolderIcon

    Disables the display of the Popup folder arrow. Default: disabled

    ShowPopupIcons

    Enables the display of standard Windows icons in the Popup Menu. Default: disabled

    PopupDefaultIcon file

    Sets the default icon to be displayed in the Popup Menu when no icons are found in particular Popup entries. file can be a binary file that contain(s) Icon(s) (DLL and EXE files), or an Icon file (.ico). Useless if ShowPopupIcons is disabled.

    PopupIconSize n

    Sets the size of the Popup Menu icons. n is the size of the icons in pixels. Default: 20


    Shortcut

    *Shortcut "titlename" x y image1.bmp image2.bmp image3.bmp [group] [MouseOverSound.wav] [ClickSound.wav] action [parameters]

    Sets a Application Shortcut on the Desktop.

    titlename the title name of the Shortcut as it would appear in the Shortcut Hints
    x The horizontal position to be used for the Shortcut. x starts from the left side of the screen. All Shortcuts' extreme left line up with the defined x position. Must be used with y.
    Specifying a negative number is the same as screenwidth - number.
    y The vertical position to be used for the Shortcut. y starts from the top of the screen. All Shortcuts' extreme top line up with the defined y position. Must be used with x.
    Specifying a negative number is the same as screenwidth - number.
    image1.bmp the icon to use for the shortcut when it is inactive. File must be in Bitmap (.bmp) format.
    image2.bmp the icon to use for the shortcut when the mouse is over it. File must be in Bitmap (.bmp) format.Use .none for no animation; old style Shortcuts.
    image3.bmp the icon to use for the shortcut when the mouse clicks on it. File must be in Bitmap (.bmp) format.Use .none for no animation; old style Shortcuts.
    group specifies what group the shortcut belongs to. (Optional)
    MouseOverSound.wav See ShortcutMouseOverSound.
    ClickSound.wav See ShortcutClickSound.
    action this tells the shortcut what to perform.
    Can be one of:
    Program Path (ie: C:\Windows\notepad.exe)
    A static !action command built into LiteStep.

    ShortcutMouseOverSound file.wav

    Sets a sound into the Shortcuts when the mouse cursor over a Shortcut, the defined sound will be played. File must be in Wave (.wav) format.

    ShortcutClickSound file.wav

    Sets a sound into the Shortcuts when the mouse is clicked on a Shortcut, the defined sound will be played. File must be in Wave (.wav) format.


    Hotkey

    *Hotkey modkey hotkey action

    Binds a combination of keys so that when pressed it will execute a command or action.

    modkey Keystroke modifier, can be one of: Ctrl, Alt, or Win
    hotkey This sets the key you want to use. It can be either: A-Z, 0-9, F1-F12, Left (Arrow), Right (Arrow), Up (Arrow), Down (Arrow), Home, End, PageUp, PageDown, Insert, Delete, Escape, Spacebar, Backspace, Apps (Application key, the one next to Right Win Key).
    action this tells the Popup entry what to perform when the hotkey is pressed.
    Can be one of:
    Program Path (ie: C:\Windows\notepad.exe)
    A static !action command built into LiteStep.


    Taskbar

    AutoHideTaskbar

    Makes the Taskbar move off screen when it is not in use. You may also set the AutoHideDelay. Default: disabled

    HideApplication

    Forces LiteStep not to display its icon in the Alt-Tab window. Default: enabled

    NoSplashScreen

    Forces LiteStep not to display its splash screen on startup. Default: disabled

    TrayIconSize n

    Sets the size of the icons in the Tray area. n is the size of the icons in pixels. Default: 16

    MSTaskBar

    Forces your taskbar to be displayed in Microsoft's style. Default: disabled

    NoTaskBar

    Prevents the taskbar from being displayed. System Tray icons will still be displayed on the desktop. Use the Task Manager to switch and manage your tasks. Default: disabled

    StripTaskBar

    Makes it so that the Wharf (when docked to the side of the screen) and Taskbar do not overlap each other. Default: disabled

    LSTaskBarFore BBGGRR

    Sets the foreground color for the Taskbar, usually used to create a bevel effect. BBGGRR is the RGB color code to be used. hexadecimal numbers such as: FFFFFF (white), 000000 (black), 808080 (gray). Default: FFFFFF

    LSTaskBarFore2 BBGGRR

    Sets the second foreground color for the Taskbar, usually used to create a depth effect. BBGGRR is the RGB color code to be used. hexadecimal numbers such as: FFFFFF (white), 000000 (black), 808080 (gray). Use 202020 for a depth effect. Default: FFFFFF

    LSTaskBarBack BBGGRR

    Sets the background color for the Taskbar. BBGGRR is the RGB color code to be used. hexadecimal numbers such as: FFFFFF (white), 000000 (black), 808080 (gray). Default: 808040

    LSTaskBarText BBGGRR

    Sets the color used for the text for the Taskbar. BBGGRR is the RGB color code to be used. hexadecimal numbers such as: FFFFFF (white), 000000 (black), 808080 (gray). Default: FFFFFF

    TaskbarStartButton

    Enables the Start Button in the Taskbar. Default: disabled.

    StartButtonSkin file.bmp

    Sets the image to be used for Start Button (center image). File must be in Bitmap (.bmp) format. Transparency is supported. Useless if TaskbarStartButton is disabled.

    StartButtonLeft file.bmp

    Sets the image to be used for Start Button (left image). File must be in Bitmap (.bmp) format. Transparency is supported. Useless if TaskbarStartButton is disabled.

    StartButtonRight file.bmp

    Sets the image to be used for Start Button (right image). File must be in Bitmap (.bmp) format. Transparency is supported. Useless if TaskbarStartButton is disabled.

    StartButtonSize pixels

    Sets the width of the Start Button. Useless if TaskbarStartButton is disabled.

    StartButtonText "text string"

    Sets the text to be used in the Start Button. Useless if TaskbarStartButton is disabled.

    TaskbarSkin file.bmp

    Sets the image to be used for the Taskbar. File must be in Bitmap (.bmp) format.

    LSTaskButtonSkin file.bmp

    Sets the image to be used for the Taskbar's Inactive Task button (center image). File must be in Bitmap (.bmp) format. Transparency is also supported.

    LSTaskButtonLeft file.bmp

    Sets the image to be used for the Taskbar's Inactive Task button (left image). File must be in Bitmap (.bmp) format. Transparency is also supported.

    LSTaskButtonRight file.bmp

    Sets the image to be used for the Taskbar's Inactive Task button (right image). File must be in Bitmap (.bmp) format. Transparency is also supported.

    LSTaskButtonSkinActive file.bmp

    Sets the image to be used for the Taskbar's Active/Current Task button (center image). File must be in Bitmap (.bmp) format. Transparency is also supported.

    LSTaskButtonLeftActive file.bmp

    Sets the image to be used for the Taskbar's Active/Current Task button (left image). File must be in Bitmap (.bmp) format. Transparency is also supported.

    LSTaskButtonRightActive file.bmp

    Sets the image to be used for the Taskbar's Active/Current Task button (right image). File must be in Bitmap (.bmp) format. Transparency is also supported.

    TaskbarNoSkinShift

    Forces the Taskbar skin not to move.

    TaskbarNoTextShift

    Forces the Taskbar text not to move.


    Desktop

    SetDesktopArea

    Enables the manual configuration of the Desktop workspace area; allows you to define how you want your maximized windows to be positioned and occupy your desktop workspace area. Default: disabled

    SDALeft n

    Sets the number of pixels from the left side of the screen before begining the Desktop workspace area. Setting this will affect how far left a window will maximize to. n is the number of pixels. Default: disabled

    SDARight n

    Sets the number of pixels to occupy from the right side of the screen; how far right the Desktop workspace area occupies. Setting this will affect how far right a window will maximize to. n is the number of pixels. You may also specify a negative number, which will be counting the number of pixels from the right side of the screen towards the left. Default: disabled

    SDATop n

    Sets the number of pixels from the top side of the screen before begining the Desktop workspace area. Setting this will affect how far up a window will maximize to. n is the number of pixels. Default: disabled

    SDABottom n

    Sets the number of pixels to occupy from the bottom side of the screen; how far down the Desktop workspace area occupies. Setting this will affect how far down a window will maximize to. n is the number of pixels. You may also specify a negative number, which will be counting the number of pixels from the bottom side of the screen towards the top. Default: disabled


    VWM

    VWMVelocity n

    Sets the virtual window switching resistance. n is the number of milliseconds that the mouse cursor has to be at the edge of the screen before switching virtual windows. Default: 300

    VWMNoAuto

    Forces the VWM to load with Auto-Switching of virtual windows disabled.

    VWMNoGathering

    Prevents LiteStep from gathering all windows to the first desktop during Recycling or startup. Default: enabled

    VWMSecurityDistance n

    Sets the distance from the edge of the screen the mouse cursor has to be before performing a virtual desktop switch. Default: 5

    VWMBackColor BBGGRR

    Sets the color of the background. BBGGRR is the RGB color code to be used. Hexadecimal numbers such as: FFFFFF (white), 000000 (black), 808080 (gray). Default: 808040

    VWMSelBackColor BBGGRR

    Sets the color for the current virtual desktop status indicator. BBGGRR is the RGB color code to be used. Hexadecimal numbers such as: FFFFFF (white), 000000 (black), 808080 (gray). Default: 404040

    VWMForeColor BBGGRR

    Sets the color of the foreground; the color for the indicators of the windows on the desktop. BBGGRR is the RGB color code to be used. Hexadecimal numbers such as: FFFFFF (white), 000000 (black), 808080 (gray). Default: FFFFFF

    VWMBorderColor BBGGRR

    Sets the border color of the VWM. BBGGRR is the RGB color code to be used. Hexadecimal numbers such as: FFFFFF (white), 000000 (black), 808080 (gray). Default: 404040

    VWMNoBackBmp

    Disables the use of Wharf Tiles and transparency in the VWM; will use the old, pre-0.24.x VWM "look". Default: disabled.

    VWMDesksX x

    Defines the number of virtual desktops columns to have. Multiply this value with the VWMDesksY one to get the total number of virtual desktops. x is the number of columns. Default: 2

    VWMDesksY y

    Defines the number of vitrual desktops rows to have. Multiply this value with the VWMDesksX one to get the total number of vitrual desktops. y is the number of rows. Default: 2

    VWMNoSwitchOnFocus

    Prevents unwanted virtual desktop switches when LiteStep is in focus (foreground/active task). Default: disabled

    VWMFocusCenter

    Makes it so that any window in the center of the screen will come into focus (become foreground/active task) after a virtual desktop switch. Default: disabled


    Misc

    LoadModule file.dll

    Loads non-Wharf LiteStep component, such as popup.dll, wharf.dll, etc. file.dll is the file to load, you may also specify a path.

    USClock

    Forces the clock to display in 12 hour time (AM/PM). LSTime support this, and some other third-party clock replacements do too. Default: disabled (24 hour time)

    LSTimeThemeFile file.thm

    Loads a LSTime theme file that allows you to customize its looks. file.thm is the theme file to load, you may also specify a path.

    ThemeFile file

    Loads a LiteStep theme file that allows you to load a pre-made theme. file is the theme file to load, you may also specify a path.

    SystrayOrientation orientation

    Changes the orientation of the System Tray. For orientation, you may use a combination of top or bottom, left or right, and vertical to define the orientation of the System Tray. Top and vertical are only used when NoTaskBar is enabled.

    SystrayWrapCount n

    This sets the number of System Tray icons to be displayed before wrapping over to the next row or column. Setting this to a large number will keep it from wrapping. n is the number of System Tray icons to be displayed before wrapping over. This is only used when NoTaskBar is enabled.

    Actions

    These are actions, built into lsapi.dll, that can be used from anywhere in LiteStep - Wharf, Popup, Hotkey, or Shortcut. They are placed where a command would be placed: i.e. *Wharf "Recycle" recycle.bmp !Recycle would give you a wharf button that recycles LiteStep. You may also stack multiple actions to a command: i.e. *Wharf "Recycle" recycle.bmp !Gather !Recycle

    !Recycle

    Reload LiteStep and its configuration (step.rc & modules.ini) files.

    !About

    Brings up the LiteStep About box which will show the version of LiteStep that is currently running and displays a list of loaded LoadModules and their version numbers.

    !Shutdown

    Brings up the Shutdown dialog box.

    !Logoff

    Closes all active programs and logs you off from your user account.

    !Run

    Brings up the run dialog box.

    !Gather

    Gathers (moves) all windows to the current desktop

    !ToggleWharf

    Toggles the Wharf WindowShade mode on or off.

    !WharfTasks

    Opens the LiteStep Task Manager. This may only be used in the Wharf.

    !CascadeWindows

    Cascades all windows.

    !TileWindowsH

    Tiles all windows horizontally.

    !TileWindowsV

    Tiles all windows vertically.

    !MinimizeWindows

    Minimizes all windows.

    !RestoreWindows

    Restores all minimized windows to their opened, "Restore" window state.

    !Quit

    Exits LiteStep
    Warning: once LiteStep has exited, you will be left with no shell. Do not use this unless you know what you are doing!

    !Popup

    Brings up the Popup menu.

    "!PopupFolder:path"

    Specifies a directory path to be displayed as a Popup folder/directory tree list. Any changes to any files or directories in the specified tree will not take effect in the Popup Menu until LiteStep has been Recycled.

    "!PopupDynamicFolder:path"

    Specifies a directory path to be displayed as a Popup folder/directory tree list. The list is refreshed everytime the Popup folder list is redisplayed, thus it may take a while to refresh the directory.

    !PopupTasks

    Allows task switching via a Popup folder-like list.

    !VWMDeskn

    Jumps to a specified virtual desktop number. n can be from 0 to the number of vitrual desktops - 1 you have.

    !VWMLeft

    Switches to the virtual desktop to the left of the current one.

    !VWMRight

    Switches to the virtual desktop to the right of the current one.

    !VWMTop

    Switches to the virtual desktop to the top of the current one.

    !VWMDown

    Switches to the virtual desktop to the bottom of the current one.

    !ShowShortcutGroup group

    Displays all shortcuts belonging to the specified group. group can be any shortcut group name that exists.

    !HideShortcutGroup group

    Hides all shortcuts belonging to the specified group. group can be any shortcut group name that exists.

    !ToggleShortcutGroup group

    Displays/Hides all shortcuts belonging to the specified group. Executing this action will change the state of the shortcut group to the opposite state. group can be any shortcut group name that exists.

    !SwitchToShortcutGroup group

    Displays all shortcuts belonging ot the specified group, and hides all other shortcuts. group can be any shortcut group name that exists.

    "<drive>\<path>\file" [parameters]

    Runs a specific executable or associated file. Example: "C:\Program Files\Netscape\Communicator\Program\netscape.exe" -mail

    @<drive>\<path>\file.app

    Loads the specified App Module. Example: @C:\Litestep\LSTime.dll
    Note: This command is used only during the loading process of the Step.rc, not when clicking on the Wharf.

    LM78

    LM78 Sample GraphicLM78 is a CPU temperature monitoring module that displays your CPU temperature and will also warn you if it is overheating. This module may or may not work with your computer. This is because the LM78 module requires that your motherboard to have LM78 support. To see if your motherboard have LM78 support, please refer to the documentation your motherboard come with. Even if you have the required hardware, the module may still function or display incorrectly because this module was originally designed and tested on an Intel® 430TX chipset motherboard. To avoid problems, this module is not loaded by default. To load it, uncomment the *Wharf "LM78 Monitor" default.bmp @c:\litestep\lm78.dll line in your Step.rc.

    Because this module is no longer futher developed, it is based on the older way of displaying graphics in the Wharf. Therefore, transparency is not supported in this module. Thus you are required to use a complete 64x64 background image (.bmp) for this module. Any transparency color in the background image will just be displayed as a "pinkish" color.

    LM78CPU cputype

    Allows you to specify what CPU type you are using in your computer.

    cputype can be: AMD, Cyrix, or Intel Default: AMD
    LM78Unit u

    Allows you to specify which temperature standard of measuring units to use. You may use Celsius (Centigrade) or Fahrenheit. u is the measuring unit. Valid values are either C or F. Default: C

    LM78MaxCPU n

    Specifies the maximum tollerance of CPU temperature before the warning LEDs in the Wharf module flash. n is the maximum temperature. Default: 75

    LM78MaxMB n

    Specifies the maximum tollerance of motherboard temperature before the warning LEDs in the Wharf module flash. n is the maximum temperature. Default: 50



    Modules.ini

    The Modules.ini file is the LiteStep Modules configuration file. Everything changed in that file affects how LiteStep's modules look and act. LiteStep includes some components that uses the Modules.ini file, which are explained below. Most third-party modules out there uses the modules.ini file as their configuration file.

    Modules.ini Index

    VWM Sticky Windows

    Sticky windows is a feature that allows you to set any window on the desktop of your choice which will allow the window to be in your active virtual desktop all the time. This means the VWM will move the window, thus following you to another virtual desktop you switch to.

    To use sticky windows:

    1. Open the modules.ini file, create it if it does not exist.
    2. Define the sticky window(s) by entering the following text:

    [LSVWM]
    stickes=n
    stickyW=windowname
    stypeW=n

    stickies=n this sets the number of sticky windows you wish to use. n is the number of sticky windows.
    stickyW=windowname This defines the sticky window number and its window name. W is the sticky window number. windowname is the window titlename, you must type in the exact case of the window you wish to stick. You may also set the windowname based on the window's Window Class, if you don't know what this means, don't worry about it.

    You may also use wildcards when defining the window name. To use wildcards, place a * before the first letter of the windowname.

    stypeW=n This is optional and allows you to force the use of window titles (text as it appears in the window titlebar) instead of Window Classes. W is the window number. For n, using 1 means window class is forced, 0 means it will use the Window Title. If no stypeW=n is defined, it assumes the n value of 0.

    Wharf

    The Wharf allows you to set its position in the modules.ini, which is read during start up. You should see the following in the Modules.ini file:

    [Wharf]
    Position=x,y
    x The horizontal position of the Wharf. x starts from the left side of the screen. The Wharf's extreme left line up with the defined x position. Must be used with y.
    y The vertical position of the Wharf. y starts from the top of the screen. The Wharf's extreme top line up with the defined y position. Must be used with x.
    Generally, you should not need to edit the positions since the Wharf will automatically write its own position upon shutting down your System or quitting LiteStep.

    AutoPlay

    LiteStep allows you to disable AutoPlay of Audio CDs, because some CD players do not work with AutoPlay correctly, or you are using a third-party module which allows you to play CDs from the Wharf.

    To disable AutoPlay open your Modules.ini and add the following lines of text:

    [Desktop]
    AudioAutoplay=0
    To reenable AutoPlay, simply change 0 to 1 or delete the text shown above all together.


    LSCPU

    LSCPU Sample GraphicLSCPU is a CPU load monitor which displays the current amount of CPU processing used by your software.


    Note: this module will only work in Windows 95/98. It will not function in Windows NT. This module is loaded by default.



    LSTime Themes

    LSTime allows you to fully customize the clock to the way you want it to look. To define the looks, LSTime incorporates Theme (.thm) files. You either have to create a theme file or modify one.

    LSTime Themes Index

    BitmapFile file.bmp

    The "skin" image file to be used for your clock. File must be in Bitmap (.bmp) format.

    DigiClockFont x y width height

    x The horizontal position to be used for the digital clock font. x starts from the left side of the tile. The first character's extreme left line up with the defined x position. Must be used with y.
    y The vertical position to be used for the digital clock font. y starts from the top of the tile. The first character's extreme top line up with the defined y position. Must be used with x.
    width The width of the font. Must be used with height.
    height The height of the font. Must be used with width.
    DateFont x y width height
    x The horizontal position to be used for the digital clock font that displays the day, month, and year. x starts from the left side of the tile. The first character's extreme left line up with the defined x position. Must be used with y.
    y The vertical position to be used for the digital clock font that displays the day, month, and year. y starts from the top of the tile. The first character's extreme top line up with the defined y position. Must be used with x.
    width The width of the font. Must be used with height.
    height The height of the font. Must be used with width
    DigiClock x y width height
    x The horizontal position to be used for the digital clock. x starts from the left side of the tile. The first character's extreme left line up with the defined x position. Must be used with y.
    y The vertical position to be used for the digital clock. y starts from the top of the tile. The first character's extreme top line up with the defined y position. Must be used with x.
    width The width of the clock. Must be used with height.
    height The height of the clock. Must be used with width
    DigiDay x y
    x The horizontal position to be used for the digital clock font that displays the day. x starts from the left side of the tile. The first character's extreme left line up with the defined x position. Must be used with y.
    y The vertical position to be used for the digital clock font that displays the day. y starts from the top of the tile. The first character's extreme top line up with the defined y position. Must be used with x.
    DigiMonth x y
    x The horizontal position to be used for the digital clock font that displays the month. x starts from the left side of the tile. The first character's extreme left line up with the defined x position. Must be used with y.
    y The vertical position to be used for the digital clock font that displays the month. y starts from the top of the tile. The first character's extreme top line up with the defined y position. Must be used with x.
    Digi2dYear x y
    x The horizontal position to be used for the digital clock font that displays the two digit year. x starts from the left side of the tile. The first character's extreme left line up with the defined x position. Must be used with y.
    y The vertical position to be used for the digital clock font that displays the two digit year. y starts from the top of the tile. The first character's extreme top line up with the defined y position. Must be used with x.
    DigiYear x y
    x The horizontal position to be used for the digital clock font that displays the year. x starts from the left side of the tile. The first character's extreme left line up with the defined x position. Must be used with y.
    y The vertical position to be used for the digital clock font that displays the year. y starts from the top of the tile. The first character's extreme top line up with the defined y position. Must be used with x.
    AnaDayFont x y width height
    x The horizontal position to be used for the analog clock font that displays the day. x starts from the left side of the tile. The first character's extreme left line up with the defined x position. Must be used with y.
    y The vertical position to be used for the analog clock font that displays the day. y starts from the top of the tile. The first character's extreme top line up with the defined y position. Must be used with x.
    width The width of the font. Must be used with height.
    height The height of the font. Must be used with width
    AnaMonthFont x y width height
    x The horizontal position to be used for the analog clock font that displays the month. x starts from the left side of the tile. The first character's extreme left line up with the defined x position. Must be used with y.
    y The vertical position to be used for the analog clock font that displays the month. y starts from the top of the tile. The first character's extreme top line up with the defined y position. Must be used with x.
    width The width of the font. Must be used with height.
    height The height of the font. Must be used with width
    AnaClock x y width height
    x The horizontal position to be used for the analog clock. x starts from the left side of the tile. The first character's extreme left line up with the defined x position. Must be used with y.
    y The vertical position to be used for the analog clock. y starts from the top of the tile. The first character's extreme top line up with the defined y position. Must be used with x.
    width The width of the clock. Must be used with height.
    height The height of the clock. Must be used with width
    AnaDay x y
    x The horizontal position to be used for the analog clock font that displays the day. x starts from the left side of the tile. The first character's extreme left line up with the defined x position. Must be used with y.
    y The vertical position to be used for the analog clock font that displays the day. y starts from the top of the tile. The first character's extreme top line up with the defined y position. Must be used with x.
    AnaMonth x y
    x The horizontal position to be used for the analog clock font that displays the month. x starts from the left side of the tile. The first character's extreme left line up with the defined x position. Must be used with y.
    y The vertical position to be used for the analog clock font that displays the month. y starts from the top of the tile. The first character's extreme top line up with the defined y position. Must be used with x.
    HourHandColor BBGGRR

    Sets the analog clock's Hour Hand color. BBGGRR is the RGB color code to be used. hexadecimal numbers such as: FFFFFF (white), 000000 (black), 808080 (gray).

    HourHandShade BBGGRR

    Sets the analog clock's Hour Hand shadow color. BBGGRR is the RGB color code to be used. hexadecimal numbers such as: FFFFFF (white), 000000 (black), 808080 (gray).

    MinHandColor BBGGRR

    Sets the analog clock's Minute Hand color. BBGGRR is the RGB color code to be used. hexadecimal numbers such as: FFFFFF (white), 000000 (black), 808080 (gray).

    SecHandColor BBGGRR

    Sets the analog clock's Second Hand color. BBGGRR is the RGB color code to be used. hexadecimal numbers such as: FFFFFF (white), 000000 (black), 808080 (gray).



    X-Mouse

    X-Mouse is a feature that allows you to switch active windows with your mouse without having to click in the window. This feature is particularly useful when you switch around windows often and you are just tired of clicking on them. The X-Mouse idea originated X-Window and since then it has grown so popular, it is now offered in Windows. Thus you may use X-Mouse with LiteStep!

    To enable X-Mouse, you must do the following:

    Windows 95/98 users 1. Download the X-Mouse utility from Microsoft and save it into the LiteStep directory.
    2. Run the W95x_mouse.exe file to extract the files into the LiteStep directory.
    3. Run Xmouse.exe which will immediately enable the X-Mouse feature.

    Note: You may also create a Shortcut in the Start Menu's Startup folder so that X-Mouse would be enabled everytime you turn on your computer.

    Windows NT users 1. Run the Registry Editor (regedit.exe)
    2. Go to HKEY_CURRENT_USER\Control Panel\Mouse
    3. Add the following DWORD Value:
        Name: ActiveWindowTracking Value: 1
    4. Restart the computer or Logoff and Login again for the feature to take effect.


    Tips

    Here are some helpful tips that will help you configure and enjoy your LiteStep better:

    Explorer /e Opens Explorer to the Desktop folder
    Explorer /s file.cab Opens a Cabinet (.cab) file.
    Exit To Dos.PIF Running this file will Shut Down Windows and exit to DOS. (Windows 95/98 only)
    Control applet.cpl Runs a Control Panel applet. Example: Control mmsys.cpl
    .LNK files you can make .LNK Shortcut files and run them from the Wharf, LS Shortcut, Popup, or Hotkey.
    Associated Files You can launch any file as long as they are associated with a program.
    Blank Wharf Tiles To create a blank Wharf tile with transparancy: *Wharf "" *. !none
    To disable VWM
    Auto-Switching
    Double-click on the VWM Wharf module to disable Auto-Switching, to reenable, double-click on it again.

    For Windows NT only:
    %SystemRoot% this is the Windows NT directory, ie: J:\WINNT
    %SystemDrive% this is the drive Windows NT is installed on, also called the root drive. ie: J:
    %UserProfile% this is your profile directory where you keep your personal files (Start Menu, Desktop, etc.)
    RAS/DUN .rnk Shortcut files To run a NT RAS/DUN .rnk Shortcut file, use "%SystemRoot%\system32\rasphone.exe" -lt file.rnk

    Using Explorer under NT with LiteStep is generally not a good idea, since many unpredictable results occur from system to system.
    To run multiple instances of Explorer:

    1. Run the Registry Editor (regedit.exe)

    2. Go to HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\Current Version\Explorer
    3. Add the following DWORD Value:
        Name: DesktopProcess Value: 1

    If you are using IE4 and up, you must do the following instead:
    1. Go to HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\
        CurrentVersion\Explorer\Browser\NewProcess

    2. Add the following String Value:
        Name: BrowseNewProcess Value: YES

    For advanced users: If you know the CLSID of an Explorer namespace, you can use it for opening a folder or program.

    The following information was taken from the Microsoft® SDK Help:

    Explorer.exe /e,/root,::{CLSID of item} Used when you junction point you are opening is an item that is under the Desktop.
    Explorer.exe /e,/root,::{20D04FE0-3AEA-1069-A2D8-08002B30309D}\::{CLSID of item} Used when the junction point you are opening is an item that is under My Computer.
    Explorer.exe /e,/root,path to junction point Used when the junction point you are opening is a file system folder.



    Misc. Info

    License

    If you really want to read that legalese stuff from GNU, go right ahead. Of course, we are never responsible for anything.

    Support

    Unfortunately, we cannot offer technical support for this software at this time. However, if you have any questions, you may ask in the EFnet IRC Network #LiteStep channel.

    Known Problems

  • Running Explorer under NT causes unpredictable results, if it works for you, then you are lucky. If it doesn't, get a third-party replacement.
  • The newly rewritten Wharf does not have Hints yet.
  • The newly rewritten Popup still have a few problems, therefore if you encounter them, we don't want to hear about it!
  • Sites

    Here are a few suggested sites you should visit for the latest in LiteStep information:

    Official Site http://www.litestep.com/
    Floach's Site http://floach.pimpin.net/


    About the LiteStep Development Team

  • Francis Gastellu - LoneRunnr - lone@aegis-corp.org

  • The original creator of LiteStep. Thank you for releasing the source which helped made LiteStep evolve so much since.

  • Brandon Williams - Floach - branwil@rage.gac.peachnet.edu retired

  • Co-Project leader and coordinator, documentation writer.

  • Bryan Kilian - MHolmesIV - bryan@rucus.ru.ac.za

  • Co-Project leader and coordinator, CVS tree maintainer, core coding.

  • Damian Hodgkiss - Mian - mian@mindless.com retired

  • Core coding, wharf coding. Now retired; thank you so much for all your very hard work!

  • Marlon West - AnTi_MTtr - aquari@surfnetusa.com retired

  • Popup development.

  • Chad Boyda - Toasty - toasty@iav.com retired

  • Core coding.

  • Brad Webb - webba - dsquared1@home.com

  • LSTime development.

  • Jonathan Vaughn - Sehnsucht - silverh@mindspring.com retired

  • LSVWM development.

  • Todd Kadrie - tin_omen - tin_omen@mindless.com

  • Default 0.24.0 Theme maker.

  • Edwin Man - TheMAN - theman@utopia2.com

  • Documentation writer, NT consulting.

  • Josh Devens - cael - caelur@innocent.com retired

  • Theme format development, consulting.

  • Warren Konkel - warren - warren@optic.gonzaga.org

  • Misc. Core coding.

  • Ian Hanschen - Furan - hanschen@uwyo.edu retired

  • Misc. Core coding.

  • Sam Phillips - Sammy - yoda@pimpin.net retired

  • Beta testing.

  • Scott Nance - Cyric^ - snance@seeingthedesign.com retired

  • Documentation writer.

  • Tim Lloyd - Apollo18 - omaha@tmbg.org retired

  • FAQ writer on http://www.litestep.net/faq/.

  • David Walker - PhenomTT - phenomtt@litestep.net retired

  • Beta testing.

    Documentation written by Edwin Man.
    Documentation Assistants (for 0.24.0 project): Brandon Williams and Scott Nance.
    Information in this documentation was assumed to be accurate at the time of publication.

    Copyright © 1998-1999 LiteStep Development. All Rights Reserved.